CFA-VX Specification
Print

TYPICAL SPECIFICATIONS
Model: CFA-VX

Description: Fan shall be galvanized steel, ceiling mounted, forward curved, direct drive, exhaust fan. Optional inline adapter is available to convert to inline type.

Construction:
Housing
The fan housing shall be constructed of 20 gauge galvanized steel and include 1/2" thick acoustic insulation inside. The fan housing shall include an automatic backdraft damper on the discharge side of the fan located within the duct connector. Two, 8-position mounting brackets shall be provided for ease of installation. The fan may be installed in ceiling or wall size permitting. Decorative grille included with fan.

Wheel
The fan wheel shall be forward curved, dynamically balanced, polymeric centrifugal wheel for quiet, efficient performance. The wheel(s) shall be firmly attached to the motor shaft with set screws.

Motor
Standard 115 volt, open drip motors shall be permanently lubricated, rated for continuous duty and thermally protected. Motors shall be mounted on vibration isolators to minimize noise and vibration. The motor disconnect shall be internal and of the plug type.

Product: Fan shall be model CFA-VX as manufactured by Ventilation Direct.

Ventilation Direct is committed to customer service and on time, accurate delivery of superior Ventilation products.

Call 1.866.433.8335 for a friendly customer service representative that can customize your exhaust fan, heater or supply air package while providing you a fast quotation including drawings and submittal packages. Our product line includes UL and ANSI listed commercial and industrial exhaust fans, heaters, make-up air units, motors and more with a two year warranty.